How to Clean White Ironstone China

Get your old china gleaming like new.

Steve Cukrov | AdobeStock

Don’t be afraid to break out the good china around the holidays. Get your old ironstone dinnerware gleaming like new with these expert tips.

Q: I bought a box of white ironstone china at an auction. Some of the older pieces are in good condition, but they have brownish stains that I’d like to remove. Is there a way to make ironstone white again? — J.T., Ossining

A: Congratulations on a nice auction find! Ironstone, a glazed earthenware that was developed as a cheap alternative to fine porcelain, was first made around 1813 in Staffordshire, England, where potteries have been turning out goods since the year dot. (Or the 1600s, anyway.) Most of the white stoneware produced there wound up on our side of the Atlantic, where it was popular because it was so durable and affordable. These days, old, marked pieces in good condition are highly collectible.

There’s actually no iron in ironstone — it was probably sold under that name to suggest how tough it is. Early pieces often have a blue-ish cast from the cobalt that was part of the mix; later ironstone is usually more cream-colored.

- Advertisement -

If the brown stains on your ironstone haven’t deeply penetrated the clay itself, you can remove them by soaking the pieces in 3 percent hydrogen peroxide, available at your friendly local drugstore. You’ll need a container with a lid, like a plastic storage bin, big enough to hold the piece completely submerged in hydrogen peroxide. Put the lid on to stop the peroxide from evaporating and leave the china to soak for two or three days.

Wait for a sunny day, then remove the ironstone piece and put it in sunlight. The hydrogen peroxide will vaporize and the brown stains should disappear and leave the piece white again. You can put the ironstone into a cold, electric oven and let the temperature rise to no more than 200 degrees. Turn off the oven and let the piece cool before washing it. Do not use a gas oven for this step. Although a solution of 3 percent hydrogen peroxide isn’t flammable (like the higher concentrations that hairdressers use), after the water content evaporates, the fumes plus a flame can cause an explosion. It’s unlikely, but still, I’d stick with sunlight.

A few more tips:

  • Hydrogen peroxide comes in stronger solutions than three percent, but those can burn your skin.
  • Don’t use chlorine bleach. It may remove the stains, but it can dissolve the glaze and break down the clay underneath.
  • To remove rust stains, dab on a little naval jelly or Zud using a soft cloth.
  • Toothpaste or dissolved denture tablets can remove gray marks caused by silverware.
  • Even though it’s tough, it’s best to hand wash old ironstone — it can be damaged by the high water temperatures and detergents in a dishwasher.
  • If you use the ironstone to serve food, remember that high-fat or acidic foods can seep through hairline crazing in the glaze and cause new stains. Wash and dry the pieces soon after using them.

Our Westchester Home Design Awards event is June 26!

Our Wine & Food Festival returns June 4-9!

Our Wunderkinds event takes place on May 23!

Our Best of Business Ballot is open through May 15!

Our Healthcare Heroes Awards event takes place on May 9!

Our Westchester Home Builders Awards take place on April 4!

Our Diversity, Equity & Inclusion Forum is March 14!

Unveiled: A Boutique Bridal Brunch is February 25!

Our Best of Westchester Elimination Ballot is open through March 6!

Holiday flash sale ... subscribe and save 50%

Limited time offer. New subscribers only.